TransNANO Transport Incubator
Transport Incubators are developed to maintain optimum thermal environment for a definite time in the enclosure for undisturbed incubation when the baby is being transported to a different location outside the hospital premises in ambulance, car, ship or airplane
It also has HFNC mode for spontaneously breathing hypoxic patients those are indicating blue coloration to the skin, lips, and fingernails or Cyanosis and patient suffering from anemia. With this method, blended and humidified oxygen is delivered via short nasal prongs or a nasal mask to increasing level of oxygen in blood through breathing and maintain level of saturation.
Features
Tested as per latest EN/IEC safety standards
Light Weight & Low Power Consumption


Physical and Environmental Specifications
Parameter | Specification | Unit |
---|---|---|
DIMENSIONS AND WEIGHT (BASIC UNIT) | ||
Length | 660.4 | mm |
Depth | 381 | mm |
Height | 381 | mm |
Weight | 13-15 | kg |
Weight including Trolley | 70-80 | kg |
OPERATION | ||
Temperature | 10 to 45 | °C |
Atmospheric Pressure | 50 to 106 | kPa |
Relative Air Humidity (non-condensing) | 0 to 90 | % |
STORAGE and TRANSPORT | ||
Temperature | 10 to 45 | °C |
Atmospheric Pressure | 70 to 106 | kPa |
Relative Air Humidity (non-condensing) | 0 to 90 | % |
OTHER | ||
Altitude | ≤ 2000 | m |
Electrical Specifications
Parameter | Specification | Unit |
---|---|---|
EXTERNAL POWER SUPPLY AC | ||
Voltage | 230 | VAC |
Frequency | 50 | Hz |
Power Consumption | 150 | Watts |
General Specifications
Parameter | Specification |
---|---|
Temperature Control | Computerised Software based PID Servo Control System. PID is the most advanced servo control system which considers even smallest change in temperature. |
Fuse Rating | 3A, 250V |
Set Temperature Range | Baby mode: 30°C – 38°C in 0.1°C increment |
Resolution | 0.1°C |
Accuracy | ±0.2°C |
Probe Interchangeability | ±0.2°C |
Overheat Temperature | 38°C (BABY) |
Alarms | High Skin Temp, Low Skin Temp, Sensor Failure, Heater Failure, Power Failure, Battery Low, Overheat |
Modes | Baby, Manual |
Heater Output Range | 0 – 100% in steps of 1% |
Baby Area | 508 x 330.2 mm |
Mattress | Foam Density of approx. 21-25 kg/M³. Mattress Cover removable with zipper, waterproof, washable, resistant to cleaning with chlorine-based solutions and flame retardant. |